Chamfer Edges: CHAMFEREDGE |
|
( Toolbar: Solids Editing > Chamfer Edges Ribbon: Draw 3D > Chamfer Edges (in Solids Editing) Menu: Modify > Solids Editing > Chamfer Edges Keyboard: _CHAMFEREDGE Experience Level: Intermediate Creates a chamfer, or a beveled edge, at the intersection of 3D solid faces. To chamfer one or more edges of a 3D solidSelect an edge or [Loop/Distance]: Select an edge of a solid to chamfer. Select another edge on the same face or [Loop/Distance]: Select additional edges to chamfer, or press Enter. Press Enter to accept the chamfer or [Distance]: Choose Distance to change the current settings for chamfer distances, or press Enter. To chamfer all edges that belong to a single faceSelect an edge or [Loop/Distance]: Choose Loop. Select edge of loop or [Edge/Distance]: Select an edge. One of two possible faces adjacent to the selected edge will be highlighted. Enter an option [Accept/Next]: Choose Accept to chamfer edges of the highlighted face, or choose Next to chamfer edges of the other face that is adjacent to the selected edge, and press Enter. Press Enter to accept the chamfer or [Distance]: Choose Distance to change the current settings for chamfer distances, or press Enter. To set the chamfer distancesSelect an edge or [Loop/Distance]: Choose Distance. Enter chamfer distance for the base surface <1.0000>: Enter chamfer distance for the base surface (measured from the selected edge to the chamfer edge on the first face), then press Enter. Enter chamfer distance for the adjacent surface <1.0000>: Enter chamfer distance for the adjacent surface (measured from the selected edge to the chamfer edge on the second face), then press Enter. Tell me about... How do I... |
![]() |
© Copyright 2023. Back2CAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.
|