Subject: Attaching audio notes

Audio notes can be created from existing *.wav files. You can also record an audio note using any microphone that works with your computer. Many computers have a built-in microphone. If you do not have a microphone and you record an audio note, the audio note will contain no sound.

An audio note icon displays on entities that have attached audio notes. The icon is for display only and cannot be selected.

To record and attach an audio note to entities

   1   Do one of the following to choose Audio Note ():    

   On the ribbon, choose Tools > Audio Note (in Manage).

   On the menu, choose Tools > Audio Note.

   On the Tools toolbar, click the Audio Note tool.

   Type audionote and then press Enter.

   2   Select the desired entities, and then press Enter.

   3   Choose Record.

   4   Click Record to begin the audio note, and then speak into the microphone.

   5   Click Stop to end the audio note.

   6   To test the audio note, click Test, and then use Pause and Stop in the Test Audio Note area.

   7   If necessary, you can record the audio note again. This overwrites the previous audio note for the entities you selected in Step 2.

   8   Click Attach.

You can modify an audio note after you attach it to an entity.
Select the entity and re-record the audio note using the previous steps.

To attach an audio note to entities using a .wav file

   1   Do one of the following to choose Audio Note ():   

   On the ribbon, choose Tools > Audio Note (in Manage).

   On the menu, choose Tools > Audio Note.

   On the Tools toolbar, click the Audio Note tool.

   Type audionote and then press Enter.

   2   Select the desired entities, and then press Enter.

   3   Choose Attach.

   4   Select the desired *.wav file, and then click Open.

Attaching_audio_notes
© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.