Subject: Changing the polyline width

You can change the width of an entire polyline, applying a uniform width to the entire entity or tapering the polyline uniformly along its entire length.    

To apply a uniform width to an entire polyline    

   1   Do one of the following to choose Edit Polyline ():

   On the ribbon, choose Edit > Edit Polyline (in Modify).

   On the menu, choose Modify > Edit Polyline.

   On the Modify toolbar, click the Edit Polyline tool.

   Type editpline and then press Enter.

   2   Select the polyline.

   3   In the prompt box, choose Width.

   4   Specify the new polyline width.

   5   In the prompt box, choose another option, or choose Done to complete the command.

To taper a polyline uniformly along its length

   1   Do one of the following to choose Edit Polyline ():     

   On the ribbon, choose Edit > Edit Polyline (in Modify).

   On the menu, choose Modify > Edit Polyline.

   On the Modify toolbar, click the Edit Polyline tool.

   Type editpline and then press Enter.

   2   Select the polyline.

   3   In the prompt box, choose Taper.

   4   Specify the starting width.

   5   Specify the ending width.

   6   In the prompt box, choose another option, or choose Done to complete the command.

Changing_the_polyline_width
© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.