Subject: Creating dishes

You can create a three-dimensional dish. The latitude lines of a dish are always paral­lel with the xy plane of the current UCS; the central axis is always parallel with the z-axis. You position a dish by specifying its center point. You determine the size of a dish by specifying either its radius or its diameter.

To create a dish as an ACIS solid

   1   Do one of the following to choose Dish ():

   On the ribbon, choose Draw 3D > Dish (in Draw 3D Solids).

   On the menu, choose Draw > 3D Solids > Dish.    

   On the Draw 3D Solids toolbar, click the Dish tool.

   Type dish and then press Enter.

   2   Specify the center of the dish.

   3   Specify the radius or diameter.

To create a dish as a 3D mesh

   1   Do one of the following to choose Dish ():

   On the ribbon, choose Draw 3D > Dish (in Draw 3D Meshes).

   On the menu, choose Draw > 3D Meshes > Dish.

   On the Draw 3D Meshes toolbar, click the Dish tool.

   Type ai_dish and then press Enter.

   2   Specify the center of the dish.

   3   Specify the radius or diameter.

.

 

Center (A) and radius (B) of the dish.

Creating_dishes
© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.