Subject: Creating domes

You can create a three-dimensional dome. The latitude lines of a dome are always parallel with the xy plane of the current UCS; the central axis is always parallel with the z-axis. You position a dome by specifying its center point. You determine the size of a dome by specifying either its radius or its diameter.

To create a dome as an ACIS solid

   1   Do one of the following to choose Dome ():

   On the ribbon, choose Draw 3D > Dome (in Draw 3D Solids).

   On the menu, choose Draw > 3D Solids > Dome.

   On the Draw 3D Solids toolbar, click the Dome tool.

   Type dome and then press Enter.

   2   Specify the center of the dome.

   3   Specify the radius or diameter.

To create a dome as a 3D mesh

   1   Do one of the following to choose Dome ():

   On the ribbon, choose Draw 3D > Dome (in Draw 3D Meshes).

   On the menu, choose Draw > 3D Meshes > Dome.

   On the Draw 3D Meshes toolbar, click the Dome tool.

   Type ai_dome and then press Enter.

   2   Specify the center of the dome.

   3   Specify the radius or diameter.

 

Center (A) and radius (B) of the dome.

Creating_domes
© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.