Subject: Drawing a closed spline

You can draw a closed spline, which is a spline for which the start point and endpoint are the same. Because the spline is closed, you specify only one tangent.

To draw a closed spline

1 Do one of the following to choose Spline ():

• On the ribbon, choose Draw > Spline (in Draw) or Draw 3D > Spline (in Curves).

• On the menu, choose Draw > Spline.

• On the Draw toolbar, click the Spline tool.

• Type spline and then press Enter.

2 Specify the first point of the spline.

3 Specify the second point of the spline.

4 Specify as many more points as you want.

5 When you have finished, in the prompt box, choose Close.

6 To complete the command, specify the tangent point.

The start point and endpoint (A) of a closed spline.

© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.