Subject: Drawing a rectangular plane

To draw a rectangular plane

   1   Do one of the following to choose Plane ():

   On the ribbon, choose Draw > Plane.

   On the menu, choose Draw > Plane.

   On the Draw toolbar, click the Plane tool.

   Type plane and then press Enter.

   2   Choose Rectangle.

   3   Specify the first point.

   4   Specify the opposite corner.

   5   Specify the rotation angle.

   6   To complete the command, specify the opposite corner to draw another rectangle, or press Enter.

 

Opposite corners (A and B) and rotation angle (C) and resulting plane.

You can control whether planes are shown filled or as outlines using the Fill tool () on the Settings toolbar. You can convert planes into individual line entities cor­responding to the outline of the plane using the Explode tool () on the Modify toolbar.                             

Drawing_a_rectangular_plane
© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.