Subject: Drawing lines

A line consists of two points: a start point and an endpoint. You can connect a series of lines, but each line segment is considered a separate line entity.  

To draw a line

   1   Do one of the following to choose Line ():

   On the ribbon, choose Home > Line or choose Draw > Line.

   On the menu, choose Draw > Line.

   On the Draw toolbar, click the Line tool.

   Type line and then press Enter.

   2   Specify the start point.

   3   Specify the endpoint.

   4   In the prompt box, choose Done to complete the command.

 

Start point (A) and endpoint (B).

The prompt box provides several options as you draw. For example, when you draw the first line segment, you can specify its length or orientation angle. After you draw at least one line segment, you can click Undo to remove the previous line segment. You can click Done to end the line command. After you draw two or more line seg­ments, you can click Close to complete the line command by drawing a line segment that connects to the start point of the first line segment you drew.

If the last entity you drew was an arc, you can also draw a line tangent to and starting from the endpoint of the arc.

To draw a line as a continuation from the end of an arc

   1   Do one of the following to choose Line ():

   On the ribbon, choose Home > Line or choose Draw > Line.

   On the menu, choose Draw > Line.

   On the Draw toolbar, click the Line tool.

   Type line and then press Enter.

   2   In the prompt box, choose Follow.

   3   Specify the length of the line.

 

Endpoint of previous arc (A) and length of the line (B).

Drawing_lines
© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.