Subject: Dividing entities into segments



You can place markers along a selected entity, dividing that entity into a specified number of equal-length segments. You can use either a point entity or a block to mark the segments.    

To divide an entity into segments and mark them using point entities

Advanced experience level

   1   Do one of the following to choose Divide ():    

   On the ribbon, choose Edit > Measure (in Modify).

   On the menu, choose Modify > Divide.

   On the Modify toolbar, click the Divide tool.

   Type divide and then press Enter.

   2   Select the entity.

   3   Specify the number of segments, and then press Enter.  

 

 

 

When you select the entity by pointing, divisions are marked beginning from the end closest to the point at which you select the entity (A). Blocks or point entities (B) are placed along the entity to mark it in equal intervals.

 

To divide an entity into segments and mark them using blocks    

Advanced experience level

   1   Do one of the following to choose Measure ():

   On the ribbon, choose Edit > Measure (in Modify).

   On the menu, choose Modify > Divide.

   On the Modify toolbar, click the Divide tool.

   Type divide and then press Enter.

   2   Select the entity.

   3   In the prompt box, choose Insert Blocks.

   4   Type the name of the block you want to insert as the marker.

   5   In the prompt box, choose either Yes-Align Blocks to rotate each insertion of the block so that its vertical alignment is always perpendicular to the entity or
No-Do Not Align to insert each copy of the block with a zero rotation angle.

   6   Specify the number of segments, and then press Enter.

Dividing_entities_into_segments
© Copyright 2022. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.