Subject: Chamfering two entities using the distance-angle method

To chamfer two entities using the distance-angle method

   1   Do one of the following to choose Chamfer ():

   On the ribbon, choose Modify > Chamfer (in Modify).

   On the menu, choose Modify > Chamfer.

   On the Modify toolbar, click the Chamfer tool.

   Type chamfer and then press Enter.

   2   In the prompt box, choose Chamfer Settings.

   3   In the Drawing Settings dialog box, click the Entity Modification tab.

   4   Under Chamfer Distances And Angles, click Distance-Angle.

   5   Under Chamfer Distances And Angles, specify the chamfer distance and angle.

   6   Click OK.

   7   Select the first entity.

   8   Select the second entity.

 

 

 

Select the first (A) and second (B) entities. The chamfer is drawn, based on the distance measured along the first entity (C) and the angle (D) formed with the first entity.

Chamfering_two_entities_using_the_distance-angle_method
© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.