Subject: Adding a geometric tolerance

To add a geometric tolerance

   1   Do one of the following to choose Tolerance ():     

   On the ribbon, choose Annotate > Tolerance (in Dimensions).

   On the menu, choose Dimensions > Tolerance.

   On the Dimensioning toolbar, click the Tolerance tool.

   Type tolerance and then press Enter.    

   2   To display the geometric tolerance symbols, on the first line, click the Sym box.

   3   Click to select a geometric tolerance symbol.

   4   Under Tolerance 1, click the Dia box to add a diameter symbol.

   5   In the field, type the first tolerance value.

   6   To display the material condition symbols, click the M.C. box.

   7   Click to select a material condition.

   8   Under Tolerance 2, repeat steps 4 through 7 to add a secondary tolerance value, if appropriate.

   9   Under Datum 1, type the primary datum reference letter.    

   10   To display the material condition symbols, click the M.C. box.

   11   Click to select a material condition.

   12   Repeat steps 9 through 11 to add secondary and tertiary datum, if appropriate.

   13   In the second row, repeat steps 2 through 12 to add composite tolerances, if appropriate.

   14   In the Height box, type a projected tolerance zone height value, if appropriate.

   15   To insert a projected tolerance zone symbol, click the Projected Tolerance Zone box, if appropriate.

   16   Click OK.

   17   In the drawing, specify the location of the feature frame.

© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect,, CAD Direct,, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.