Subject: Saving print settings for a model or layout

All print settings can be saved with a model or layout, which can be particularly help­ful if you don’t use page setups. The next time you print the model or layout, the saved print settings automatically load in the Print dialog box.

Saved print settings are also used when publishing.
If you’re publishing drawings using sheets that don’t have a page setup assigned, the print settings saved for the model or layout are used by default.

To save print settings with a model or layout

   1   Click the desired Layout tab or the Model tab for which you want to save print set­tings.

   2   Do one of the following to choose Print ():

   On the ribbon, choose the Application button then choose Print, or choose Output > Print (in Print).

   On the menu, choose File > Print.

   On the Standard toolbar, click the Print tool.

   Type print and then press Enter.

   3   Make your print selections.

   4   Click Apply to Layout.

   5   Do one of the following:

   Click OK to print and close the dialog box.

   Click Cancel to close the dialog box without printing.

© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect,, CAD Direct,, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.