Subject: Chamfering and filleting solids

You can chamfer or fillet a three-dimensional solid much like you chamfer or fillet a two-dimensional entity.

To chamfer a solid

1 Do one of the following to choose Chamfer ():

• On the ribbon, choose Edit > Chamfer (in Modify).

• On the menu, choose Modify > Chamfer.

• On the Modify toolbar, click the Chamfer tool.

• Type chamfer and then press Enter.

2 Select the edge of the base surface to chamfer. (One of two surfaces adjacent to the selected edge will be highlighted.)

3 Do one of the following:

• To select a different surface, type n and press Enter.

• To use the current surface, press Enter.

4 Specify the base surface distance (measured from the selected edge to the base surface).

5 Specify the adjacent surface distance (measured from the selected edge to the adjacent surface).

6 Do one of the following:

• Specify the edges to chamfer.

• To select all edges around the base surface, type l and press Enter.

To fillet a solid

1 Do one of the following to choose Fillet ():

• On the ribbon, choose Edit > Fillet (in Modify).

• On the menu, choose Modify > Fillet.

• On the Modify toolbar, click the Fillet tool.

• Type fillet and then press Enter.

2 Select the edge of the solid to fillet.

3 Specify the fillet radius.

4 Select additional edges to fillet, and press Enter to fillet.

© Copyright 2023. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.