Subject: Converting three-dimensional entities to meshes



You can convert the following entities into three-dimensional surfaces: 3D solids, 3D faces, polyface meshes and polygon meshes, regions, and closed polylines.

To convert a three-dimensional entity to a mesh

   1   Do one of the following to choose Convert to Mesh ():

   On the ribbon, choose Draw 3D > Convert to Mesh (in Convert).

   On the menu, choose Modify > 3D Convert > Convert to Mesh.

   Type convtomesh and press Enter.

   2   Choose Settings to view or change settings for the conversion:

   Show Edges Click this check box to display the edges that form the mesh.

   Subdivide Level Enter a value from 0 to 3 to determine the level of detail. The higher the number, the greater the detail applied to the converted mesh.

   3   Click OK.

   4   Select the entities you want to convert, then press Enter when done.

Converting_three-dimensional_entities_to_meshes
© Copyright 2022. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.